| OBJECTIVE: |
Transparent
colours cast into clear resin, create a modern bright xmas
display |
| SKILL
LEVEL - |
 |
| TECHNIQUES
- |
Casting
- Casting with Clear Casting Resin (PDF)
Polishing with Micro Mesh Polishing Papers |
| WHAT
YOU NEED - |
Suitable Mould - we have used an RTV Mould from project
- Chirstmas Conifers &
Twinkle Twinkle
Clear Casting Resin
Release Agent, if required
Transparent dyes suitable
to Clear Casting Resin - Turquoise, Emerald Green, Magenta
(or desired colours)
Micro Mesh Polishing
Papers / Pads
|
Let
the fun begin -
-
Prepare
mould - ensure mould is clean & dry. Spray
with release agent if required.
-
Measure out Resin as per product instructions.
Measure MEKP (hardener) into separate cup
-
Add
pigment colour. For good colour depth approximately
6 - 8 drops per 100gm, however some experimenting
will be required. Mix well
-
Add
MEKP and mix well
-
Pour
coloured resin into mould and allow to cure.
-
Polish
with fine sand paper or polishing sheets to gloss
finish, removing crazing
|
|
|
|
The information
contained herewith is for information purposes only and should be
used as a guide only. The author and publisher does not claim that
the methods shown are the only way to achieve these results. We
advise the reading and strict adhesion of Manufacturers Instructions
with regard to specific product. The publisher accepts no responsibility
to individuals, organizations, companies etc. for the results of
applying this information. The publisher accepts no responsibility
or liability for product use or misuse. Recommendations for use
do not constitute a warranty, either expressed or implied, of the
fitness or suitability of the product for a particular purpose.
No warranty is expressed or implied regarding the accuracy of results
to be obtained from the use of product. Each User should conduct
his/her own tests to determine suitability of the materials for
its particular purpose. |
|
|
