... stuff for
hobby, craft, art & special fx,

THIS SITE LAST UPDATED
JANUARY 2008

(a member of the Access Resource Group) ACN 107 866 884 ABN 33 107 866 884

VISITS BY APPOINTMENT ONLY
PHONE # - 07 3284 1111
email: info@armsmodelit.com.au


Mould Making, Casting, Sculpting, Construction, Resin Jewellery, Metal Jewellery, Art & Craft Supplies ...
RTV SILICONES, RESINS, GYPSUM PLASTER, PIGMENTS, POWDERS, METAL FINISHES, CLAYS, TOOLS,GLUES, MOULDS


KNEADATITE (GREEN STUFF)

BONDS - SEALS - FILLS
IRON, STEEL, ALUMINIUM, LEAD, GLASS, WOOD,
CONCRETE, TILE, FIBERGLASS, SOME PLASTICS.

 

Kneadatite® Epoxy Sealant Adhesive Putty

Kneadatite's®, Kneadatite Blue/Yellow ("Green Stuff") is a two-part epoxy/polyamide sealant/adhesive for interior and exterior maintenance and repair. It has excellent adhesion to stone, ceramic, metal, wood and many plastics, including vinyl.

Nicknamed "Green" by sculptors and modelers, Blue/Yellow is well-known for its long worklife, non-grainy texture and ability to hold fine detail. Cured models withstand up to 4 vulcanizations. Blue/Yellow is not intended for structural applications.

Blue/Yellow has a 1 to 2 hour work life, Functional cure occurs in 4 to 5 hours when Blue/Yellow can be drilled, sawed, carved, sanded, stained, and painted. Ultimate hardness is reached in 20 to 24 hours. Cured color is green.

Benefits:

  • Putty-like consistency eliminates drips and runs for a "no mess" application.
  • No tools required for use.
  • Mixes in minutes.
  • Long worklife.
  • Superior strength and flexibility.
  • Paintable.
  • No shrinkage; solvent and VOC-free.
  • Solvent-resistant.
  • Cures underwater.

Typical applications:

  • #1 preferred sculpting putty since the early '70s.
  • Sculpt models and prototypes.
  • Repair cracks in pipes and tanks.
  • Make underwater pool repairs.
  • Fill small automobile dents.
  • Create custom-formed gaskets.
  • Repair stripped screw holes.
  • Hobby and crafts.
  • Excellent for modeling, making molds and prototypes

 

 

        ... and more


How to use this product -

To achieve optimum adhesion, repair surfaces should be scuffed and/or lightly sanded and cleaned free of grease or dirt prior to application.

Side-by-side tape: Cut or twist off a length of tape and mix by kneading with damp fingers to a uniform color. Any length contains the correct ratio of base to curing agent. Apply within 1 hour of mixing.



PLEASE READ ALL TECHNICAL DATA SHEETS THOROUGHLY BEFORE USE
Worksheets -
Projects -


MSDS